内容介绍
本文档由会员 wanli1988go 发布
1 Lathes
Lathes are machine tools designed primarily to do turning, facing and boring, Very little turning is done on other types of machine tools, and none can do it with equal facility. Because lathes also can do drilling and reaming, their versatility permits several operations to be done with a single setup of the work piece. Consequently, more lathes of various types are used in manufacturing than any other machine tool.
The essential components of a lathe are the bed, headstock assembly, tailstock assembly, and the leads crew and feed rod.
The bed is the backbone of a lathe. It usually is made of well normalized or aged gray or nodular cast iron and provides s heavy, rigid frame on which all the other basic components are mounted. Two sets of parallel, longitudinal ways, inner and outer, are contained on the bed, usually on the upper side. Some makers use an inverted V-shape for all four ways, whereas others utilize one inverted V and one flat way in one or both sets, They are precision-machined to assure accuracy of alignment. On most modern lathes the way are surface-hardened to resist wear and abrasion, but precaution should be taken in operating a lathe to assure that the ways are not damaged. Any inaccuracy in them usually means that the accuracy of the entire lathe is destroyed.
1.车床
车床主要是为了进行车外圆、车端面和镗孔等项工作而设计的机床。车削很少在其他种类的机床上进行，而且任何一种其他机床都不能像车床那样方便地进行车削加工。由于车床还可以用来钻孔和铰孔，车床的多功能性可以使工件在一次安装中完成几种加工。因此，在生产中使用的各种车床比任何其他种类的机床都多。
车床的基本部件有：床身、主轴箱组件、尾座组件、溜板组件、丝杠和光杠。
床身是车床的基础件。它腀@Ｊ怯删浞终鸹蚴毙Т淼幕抑蛘咔蚰瞥伞Ｋ且桓黾峁痰母招钥蚣埽衅渌静考及沧霸诖采砩稀ＭǔＴ诖采砩嫌心谕饬阶槠叫械牡脊臁Ｓ行┲圃斐Ф匀克奶醯脊於疾捎玫脊旒獬系娜切蔚脊欤瓷叫蔚脊欤械闹圃斐г蛟谝蛔橹谢蛘吡阶橹卸疾捎靡桓鋈切蔚脊旌鸵桓鼍匦蔚脊臁５脊煲芗庸ひ员Ｖて渲毕叨染取Ｎ说挚鼓ニ鸷筒辽耍蠖嗍执驳牡脊焓蔷砻娲阌驳模窃诓僮魇被褂Ω眯⌒模员苊馑鹕说脊臁５脊焐系娜魏挝蟛睿３Ｒ馕蹲耪龌驳木仍獾狡苹怠Ⅻbr>
